User Manual

8
HDMI port.
Step three: Adjust the location and angle of the PC transmitter to face the gaming area.
2.Connecting the HMD receiver
Step one: Referring to the angles shown in the illustration, remove the helmet's foam
bracket, unplug the cables, and take out from the head strap.
Step two: As shown in the illustration, thread the HMD strap through the tail end of the
helmet's receiver and out from the front end marked with the letters "TPCAST". Then, pass it
through the helmet's wire hole and secure it.
Step three: Insert the connectors of the dedicated long connection cable marked with
the Oculus logo into the interfaces on the helmet. Insert connectors A1 and A2 into the
corresponding interfaces on the helmet receiver.