User Manual

10
shown in the gure.
Step three: In PC’s network connection Settings of Windows system, select “Local connection”
to connect the router of wireless adaptor, change the connection of TCP/IP Settings to
automatically obtain IP address and DNS server address.
Note: Use the router as is, DO NOT modify the router’s settings.DO NOT restore the factory
default settings. To optimize the user experience, it is recommended to place the router in an
open location without obstacles, with a 90-degree antenna. Avoid putting the router under a
desk, behind a computer case, or in any other enclosure environment.
5. OPERATION INSTRUCTIONS
1. Connection verication
Verify that the TPCAST wireless adaptor connections are secure and tight including:
o The HMD receiver
o The PC transmitter
o The power box
o The portable power bank
o The router
Make sure that the battery is fully charged.
LAN Port
WAN Port