User Manual
21
several channels. If the problem persists, please try placing the
router in a different location.
The connectivity assistant is reporting that all the components
are connected properly, and StemVR is working well. However,
there no content playing on the HMD?
1. Please check the receiver and the PC transmitter indicators.
If the indicators are off, then check the TPCAST adapter
connections including the battery. Then Unplug the battery and
wait for 10 seconds and plug it back. Recheck the indicators, if
both the indicators are in the fast blinking mode, manually shut
off the steam VR, and reboot the Steam VR. Try to reboot the
computer if the problem persists.
2. If after 10 seconds, the signal indicator is still in the slow
blinking mode,
a)First, check if there are any obstacles between the receiver
and transmitters
b)Rematch the receiver end and transmitter. Refer to the “Usage
Steps” section of the User manual for details.
3. If the indicator lights are normally on, check if the short
HDMI cable, and the cable connecting the receiver of HMD and
the HMD, are connected tightly.
4. If the problem is still not solved, please contact TPCAST
customer service.
After successfully connecting the wireless adaptor connection,
I start Steam VR, and it displays that the system is not ready.
Why do all the status icons of the devices, in Steam VR, are
displayed as gray?
This can be fixed by restarting the VIVE HMD. Please follow the
following steps:
1. Unplug and replug the power connector (1-B) of VIVE HMD
2. Unplug and replug the power connector of the power box (1 -
E)
3. If the problem is still not solved, please try rebooting the PC.
Why does the display turn off during regular use?