User Manual
10
Step two: Fix the HMD Receiver
①
As shown in the figure, thread in all three interfaces (1-a, 1-b
and 1-c) of the dedicated long distance connection cable and
audio cable from the HMD receiver with TPCAST side and out of
the other side.
Note: The curved USB plug (1-A) requires some pressure to pass
it through the threaded hole.
Step three: Cable connection
①
Plug the 1-C USB plug of the dedicated long-distance connection cable
and the 2-B of the short distance connection cable into the USB port and
the HDMI port of the receiver respectively.
②
Thread the separated strap through the HMD cable ports in
turn and routed under the dedicated long connection cable, then
the receiver end will be fixed on the HMD strap.