User Manual
9
Step four: Straighten out the cable and reattach the foam bracket. Adjust the strap length to
t the user and ensure the cable connections are secure.
3. Power box connection instructions
Step one: As shown in the gure, insert connectors B1 and B2 of the dedicated long
connection cable into the power supply and HDMI ports on the power box respectively.
Step two: As shown in the gure, plug in the battery to the power box. The blue battery
light on the battery turns on to indicate the remaining level. To improve the utilization rate
of battery capacity, please only connect to the portable power bank before operation of the
product. After the operation, remove the portable power bank.
Step three: Put the installed battery and the power box in a portable pack and string the
pack to ensure the power box, does not fall during motion.
4. Router connection instructions
Step one: Connect the router power adaptor and conrm power indicator on the front of
panel is on.
Step two: Connect the yellow
(
LAN
)
port of router to the PC host through network cable, as
1
2
3