Operating Instructions

20
About our common-interest group:
Passionate about cooking? Come join our community of cooks
that share ideas and suggestions on cooking, smoking, BBQ,
and more! Gather with passionate cooks just like you who are
obsessed with cooking and BBQ. We love trying di󰀨erent ways of
cooking and hearing the amazing recipes our customers use. Feel
free to share your favorite, original and unique recipes or simply
learn for other cooks for around the world. We can’t wait to see
you! Take a few seconds to scan this code and join us! You will get
several free E-cookbooks as a gift. Don’t miss out!
If your device fails to work or you are less than completely satised
with this product in any way, please don't hesitate to contact us.
Tel: [phone]
E-mail: [e-mail]
Facebook: http://bit.ly/smartro_01
Website: https://www.smartro.co/
8. Contact Us
The temp
displays "LLL".
The measuring
temperature is
below -4°F (-20°C).
Take out the probe from
the low temperature
place at once. Only use
this thermometer within
normal work-temp
range -4°F to 572°F (
-20°C to 300°C).
The probe is not
plugged in completely
or the probe socket is
damaged.
Unplug the probe and
fully re-insert it into the
thermometer. If it still
has problem, please
contact us for support.
No alarm
sound after the
temperature
reaches
the alarm
temperature.
The alarm switch of
the channel you are
measuring is o󰀨.
Press the ON/OFF
button corresponding to
the channel you want
to measure to turn on
the alarm.
Cannot set
the alarm
temperature
manually.
The meat type of the
channel you selected is
not CUSTOM.
Press SET button twice
within 3 seconds to
enter the setting mode,
then press MEAT
button to adjust the
meat type to CUSTOM.
Receiver cannot
receive the
signal of Main
Unit.
Receiver and Main Unit
are too far away or there
are obstacles between
them.
Put Receiver and Main
Unit in a position where
the signal can be
received.
The signal transmission
function of Main Unit is
turned o󰀨.
Press the signal button
on Main Unit to turn on
the signal transmission.
19