Parts List

Figure 5.9 Config
Name: it’s the printer’s name, you can change it on the UP Studio software.
The default name is the printer’s S.N number.
Sound: Toggle the click sound while using touchscreen.
Preheat: Toggle the build plate preheating option. If it is on, the machine will
start pre-heating 15 minutes ahead of the start of the print job. You can read
the introduction of Preheating in Maintenance -> Preheat in the Software User
Manual.
Auto Update: Toggle the touchscreen update automatically.If switch it
off,Then the touchscreen can only update manually.
Cont.Print: Toggle the continuous print function for the printer
Private: Toggle the printer to set a password for private use. Once this option
is on, you can set a password for your printer and your printer will not be
accessible by other users on the same network without obtaining the
password.
Password: The password for the printer to protect your printer from other
people’s access. Click the text field to enter your password.
5.9 Network
This section includes Ethernet Network Settings and Wi-Fi Network Settings.
Ethernet Network Settings:
1.Plug an Ethernet cable to the LAN socket at the back of X5.
2.The Ethernet connection Status icon should be appear in the Printer Status
Bar.
3. You now can go to Config to enter Network Settings section.
4. Click Information button to edit the printer’s Ethernet Network Settings