Parts List

Click Edit on the touchscreen, and enter the suitable value for your printer.
You can also use either +/- button to adjust the value in the Value Box, and
then tap the Value Box to move the nozzle to the value height you set in the
Value Box.
Nozzle Height: is the current printer’s nozzle height.
The default value for the nozzle height for each Tiertime printer has been set
as 0mm before leaving factory floor for safety reasons. Therefore, calibration is
the mandatory step prior to your first print.
Table 5.8 Calibration Icon Description
Name
Icon
Description
Live
Nozzle
Height
Indicating the present nozzle height.
Using +/- to adjust the nozzle height manually.
Edit
To edit the nozzle height by inputing numbers
manually
Exit
Exit Calibration section and back to main menu.
5.6 Information
Within this section, it displays all the information of your printer, it also provide
gateway icons for language setting and touchscreen updating.
•Model: The Model Name of your printer’s model.
•S.N.: Your printer’s ID, which will be required if you looking for customer
service.
•Firmware Ver.: Stands for firmware version of your printer.
•Screen Vers.: Stands for the touchscreen version. You can check whether
your touchscreen is operating using the latest touchscreen system.
•Total Time: This represents the total printing time of your printer from the
beginning.
•Total Weight: This indicates the total material weight which accumulated from
the first print.
•LAN M.A.C: The unique LAN M.A.C address of your printer in Ethernet .
•WLAN M.A.C: It’s the unique printer’s M.A.C address in your Wi-Fi network.