Parts List

Figure5.4 Material
To change the material type, click the Material Type button, and then input your
filament’s weight. Make sure the material settings properly reflect your
situations, because the default setting may not fit yours.
Table 5.2 Material Icon Description
Name
Icon
Description
Withdraw
To take out the filament inserted in the
extruder unit with the preset temperature.
Click the Withdraw icon. The up arrow on the
button will start moving upwards, indicating the
extruder is heating up. The extruder will start
pushing the filament out once the temperature
reaches the melting temperature with a beep.
You now can remove the filament from the tip
of the extruder
Extrude
To load the filament into the extruder unit with
the preset temperature.
Click the Extrude icon. The down arrow on
the button will start moving downwards,
indicating the extruder is heating up. Once the
extruder temperature reaches the filament’s
melting point, the machine will give off a beep,
and you can push the filament into the
extruder and the extruder will heat up the
filament, and extrude through the nozzle.
If the machine works properly, you will find an
evenly extruded string of filament coming out