Parts List

Adding a Printer
Please note, for wifi connection, a printer will be first added to printer list before
the software can recognize the printer. After adding the printer, software will
actively scan for the presence of the machine and display in the list of avaialble
machines appear in on upper left corner.
Chapter 5. Printer Operation
5.1 Load filaments
Insert filament from the filament entrance in the spool chamber on right side.
Go to software, maintenance, select the material type, click extrude button.
When nozzle temperature reach target, machine will buzz and start extruding,
gently put filament into extruder until filament appear from the nozzle.
Extrusion will stop autoamtically.