User's Manual

65
12.3 Material
In the material section, there are Extrude, Withdraw, Change Material Type and Set
Total Weight buttons functions. To change the material type, click the Material Type
button, and then input your filament’s weight by press +/- button. Make sure the
material settings properly reflect real situations, because wrong setting could result
in print failure or compromised print quality.
For Dual extrusion the machine will able to recongize the dual extruder and teh
material interface will automatically display 2 filament options: Fliament 1 is main
material, Filament 2 is for support material.
Withdraw
Click the Withdraw icon.The up arrow on the button will start moving
upwards, indicating the extruder is heating up. The extruder will start
pushing the filament out once the temperature reaches the melting
temperature with a beep.
Extrude
Click the Extrude icon. The down arrow on the button will start moving
downwards, indicating the extruder is heating up. Once the extruder
temperature reaches the filament’s melting point, the machine will start
to extrude filament.
Stop
To stop the printer in the middle of an extruding or withdrawing
process.
Material
Type
The button will display the material profile name.
Click the Material Type icon button to change the material type/profile.
Material
Weight
To change the total weight the material remaining manually.
The material weight will be adjusted automatically based on how much
the material is consumed by print jobs.
Nozzle
Diameter
Press this button to choose between available nozzle diameters.
STO P
9999g
ABS
500g
ABS