User's Manual

corresponding X-Y location on the platform. Red square( )

indicate current location

4. Z-axis Control

Z axis indicator: black dot indicate current Z location of print

head.

click to move print head long Z axis for a small distance

click to move the print head long Z axis continuous

until reach the end

5. Extruder Settings

: current material setting use for the extruder

: current material weight left in spool that loaded to

the extruder

: current nozzle setting for the extruder

6. Maintenance

: click to initialize printer

: Setup nozzle height value

: Setup leveling of printer platform

: load a file to print

:Stop printer action immediately.

7. Printer Info