User's Manual

48
part contain pointy features that is facing down, it is recommend to increase
top lift options.
Raft
Layer
Layer
How many layer the raft will consist
Thick
mm
Layer thickness of raft
Base Width
mm
Path width of the first 2 layers of raft
Expand
mm
How much to expand from the perimeter of the bottom layer for the raft
layer
Mode
N/A
Raft infill mode, Profile is for Tiertime printer only, the raft is generated
by printer. The pattern is not visible at this stage.
The hatch and offset are for non-Tiertime printer, Tiertime machines
cannot use these 2 types.
8.6.2 Path
Term
Unit
Description
Path Mode
Profile/Perimeter
N/A
Infill Density
%
Density of the infill pattern, 100%=solid infill, 0%=no infill
Support Density
mm
Determine line density of the support column, the large the value the more