User's Manual

5. Click Auto Leveling, the print head will then probe the platform in 9 positions. The

leveling probe will be lowered and start to probenine positions on the platform. After

probing the platform, theleveling data will be updated and stored in the machine.

Theleveling probe retracts automatically when the process is done.

7.4 Manual calibration

Although the Auto Calibration is always the easiest way to calibrate the UP600,

some advanced users may prefer to level manually to have full control of result.

1. At plate leveling interface, click the Manual Leveling button

2. Red square now move the box on upper left corner representing the measurement point

and the current location of nozzle.