User's Manual

27
3. Select “Extruder” Tab, Check the “Extruder 2”
Option, then select filament “Tiertime PVA” for its
filament option. Then click “Apply” => “OK”
4. Go to top menu print settings, select the correct machine type and print settings, eg Layer thick and
nozzle diameter, the filament type for both extruders. The left side material is filament 1(main material)
select PLA, the right side material (support) select Tiertime PVA.
6.3.2 Load a STL file by click the “+” button on the vertical menu.