User's Manual

20
5. Go to touchscreen
5.1 Press Material
5.2 Press Material Button until it shows
“PLA”, then press “+” button to increase
material weight to 500g.
5.3 Press “ ” to extrude material. The
machine will heat up and buzz when start
to extrude. It will stop automatically
5.4 When the extruder start to extrude,
push the filament into entry 1 on extruder
until it can be feed by extrusion motor.
5.5 The filament should able to be
extruded from nozzle and form a clean
straight thin thread.