Users Manual Part 3

79
We suggest you change the filter every 3 months, or every 300 hours active printing
time.
You can purchase the new filters from the official Tiertime online store,
https://shop.tiertime.com, or popular ecommerce web sites like Amazon, or eBay.
To change the Filters
The filter system is located at the left side of the build chamber.
1, Use a screwdriver to unscrew the two screws in the front, remove the cover, and
take out the two used filters separately.
2, Take two new filters, place them into the slot, and push the slot back to the end.
3, Tighten the screws using screwdriver.