Users Manual Part 2

50
location for customized functions. Accepted Gcodes:
Print End
Layer Start
Layer End
Profile Start
Profile End
Infill Start
Infill End
Support Start
Support End
Path Start
Path End
Mat Lib (Material Library)
Filament
Select material profile
Type
Material Type: can only choose from preset types
Material ID
A unique number for matching materials. E.g..Tsk file’s
material ID must match printer’s material ID in order to
print.
Manufacturer
Name of Material manufacturer
Fila. Dia.
mm
Filament Diameter, this value will affect the extrusion
scale
Density
g/cm
3
Density of material, use for estimate
Cost/Kg
$/kg
User defined for their own reference
Print
Speed Ratio
N/A
A ratio to adjust the all the speed settings at the same
time.
Max Raft Speed
mm/s
Max first layer speed of raft. If faster than this value, will
be override by this value.
Retract
Speed
mm/s
Speed for retraction, the faster the retraction the less
likely to have stringing effect during jumping. But it will
also put stress on extrusion mechanism and the optimal
speed depends on hardware.
Max Length
mm
Max possible length for a single retraction
Min Travel
mm
The distance threshold for retraction, if movement is
smaller than this value, retraction will not be applied.
Ratio
N/A
Actual retraction length = Ratio* Travel.
Temperature
Print
℃
Base temperature for printing
Standby
℃
Temperature when standby (during dual extrusion)
Platform
℃
Platform temperature
Shrink
X
%
X-axis compensation for material shrinkage after cooling
Y
%
Y-axis compensation for material shrinkage after cooling
Z
%
Z-axis compensation for material shrinkage after cooling