Users Manual Part 2

48
Raft
mm/s
Print speed of raft layers
Raft Base
mm/s
Print speed of first layer of raft
Jump
mm/s
Speed of jumps (non- printing movements of extruder)
Temperature
Temperature Tune
Profile Tune
℃
Set increase/decrease of nozzle temperature when
printing Perimeters
Infill Tune
℃
Set increase/decrease of nozzle temperature when
printing Infill
Support Tune
℃
Set increase/decrease of nozzle temperature when
printing Support
Raft Tune
℃
Set increase/decrease of nozzle temperature when
printing Raft
Support Peel
Bond Strength
%
Define the bond strength between part and support.
Extrude Scale
Profile
N/A
Extrusion scale of perimeter, value larger than 1 means
increasing extrusion amount, value smaller than 1 means
reducing extrusion.
Inner Profile
N/A
Set extrusion scale of inner profile
Top
N/A
Set extrusion scale of top layer
Bottom
N/A
Set extrusion scale of bottom layers
Support
N/A
Set extrusion scale of support
Jerk
N/A
Set extrusion scale of short paths
Raft
N/A
Set extrusion scale of raft
Raft Base
N/A
Set extrusion scale of first layer of raft
Start Optimize
Layer Start
Preference for layer start point
Fixed Start X
Define start point on X coordinate.
Fixed Start Y
Define start point on Y coordinate.
Profile Start
Preference of Start base perimeter features
Join Size
%
Size of join
Join Extend
mm
How much the join extend and reach into infill area.
Join Cross
Whether make the join to cross-path
Speed Down
Slowest Speed
mm/s
Define slowest speed for short perimeter
Short Profile
mm/s
Define length of short perimeter for applying speed down
Min. Layer Time
s
Define the minimum duration a layer must spend. Ensure
enough cooling time for part.
Firsts Layer
Speed
%
Speed down percentage for the 1
st
layer. Slow down for
first layer could improve layer adhesion to platform,
increase print success rate.
Other Options