Users Manual Part 2

47
3.Special
Special Options
Fill Mode
N/A
Fill = Perimeter+infill+top/bottom
Shell = Perimeter+top/bottom (no infill)
Vase = Perimeter only (no infill, no top/bottom)
Tolerance
mm
+0.1 = X and Y plane both increase 0.1mm in size
Fuse Gap
mm
Radius for small gap to be fused.
Hole Shrink
(only applied to vertical holes on a part, expand small holes to counter the hole
shrink effect)
Max. Radius
mm
Threshold for applying shrink compensation, holes larger
than this diameter value will be ignored.
Ratio
N/A
The bigger this value the more compensation for small
holes
Max Shrink
N/A
Set max. Shrink ratio for compensation
Entity ID
Profile
different regions of a print, are marked with an entity ID, so that
they can be assign to different extruders to print. The entity IDs
are used in the Extruder Settings.
Inner Profile
Top
Bottom
Infill
Support
Support Hatch
Raft
Speed
Profile
mm/s
Print speed of Perimeters
Inner Profiles
mm/s
Print speed of Inner Perimeters
Bottom and Top
mm/s
Print speed of Bottom and Top
Fill
mm/s
Print speed of Fill
Support
mm/s
Print speed of Support
Support Hatch
mm/s
Print speed of Support Fill
Jerk
?
Print speed of Short path
Jerk Length
mm
Define Max. Length of short path