Users Manual Part 1

4.2. Install Software UP Studio 3.0

To operate the UP300D, you need to install the UP Studio 3.0 software on your

computer. Although UP Studio 2.X can also work with UP300D, it does not support

dual extrusion function and is obsoleted.

You can download the installation files of UP studio software from the following url:

https://www.tiertime.com/downloads/software

System Requirements:

Supported Operating Systems:

Windows 7 (SP1) or higher (64 bit only)

Mac OS 10.10 or higher

Hardware requirements:

Open GL 2.0

At least 4GB of RAM

Installation

Make sure you download the correct version of software based on your computer’s

configuration.

4.3 Update the Touchscreen Firmware

We regularly update the Tiertime 3D printer’s touchscreen program. It is important to

make sure your UP300D’s touchscreen system is up-to-date before the first use and

pay attention to the upgrade announcement for touchscreen system in the future.

1. Download the UP300D Touchscreen Upgrade Program from

https://www.tiertime.com/touchscreen-upgrade-program/

2. Save the file to the root directory of the USB drive which comes with the UP300D,

and make sure the file is named as “UP300D_x.x.x_update.tt” (Case sensitive), x.x.x

being the version number.

3. Insert the USB drive to the USB socket under the touch screen, and turn on the

printer. Wait until the printer is fully ready, go to Information Page, and press the

“Upgrade” button. Follow the instructions on the touchscreen afterwards.

4. Keep the USB drive handy for the future use.