User's Manual

17
Pause of Print Job
During printing, the machine could
be paused through maintainence
interface.
When the printer is idle, there is a
"Table heat 1 hr" button under
"Stop All" button. Press this button
will keep platform heated for one
hour.
When the printer starts to
print, "Table heat 1 hr" button
will disappear. The button will
reappear after the printing of
raft is finished but the button
becomes "Pause Print" which
indicates pause function is now
available. Press this button the
printer will pause the print job and
the button will become "Resume
Print" for resuming the print job.
When the print job is paused, the
other buttons on the maintence
interface will become available.
User could change laments using
"Withdraw" and "Extrude" buttons
or move the print head and print
platform with the location buttons
and the "To" button. User should
be aware not to crash the print
into the print head.
Printing Progress
Printing progress is shown in the LED progress bar on top of the UP
BOX letters. The rst two red LED represent printing of raft, the others
represent the rest of the model.