User's Manual

Cetus3D

After sending the data, the program will

show the amount of material and the

time needed for the print job in a pop-

up window. At the same time, the nozzle

will start to heat up. The print will start

automatically.

Now your are safe to disconnect the

printer from computer.

Set Layer Thickness

Select Inll Type

Select Print Quality/Speed

Shell: No inll,

normal wall.

Printing a Model

Make sure the printer is connected to a computer throug USB or Wi-Fi ( go to page 19

for details about Wi-Fi setting), and loaded a model.

Advanced Options

Surface: No top and bottom layers,

no inll, single perimeter.

Hollow

Big Hole

Loose Inll

Solid Inll

Click the print button to open the print interface

Please note that 0.05mm

and 0.07mm layers are

optimized for 0.2mm

diameter nozzles, while

0.6mm nozzle is only for

printing layer thickness of

0.3mm or above