User's Manual

3.Operation
UP Plus 2 User Manual 22
Tip: If you hold down the ‗Ctrl‘ key, you can simply drag the model to whatever
position you want.
Rotating the model: Click the ―Rotate‖ button on the toolbar, choose or input how many
degrees you want to rotate in the text box, then choose the axis to rotate around.
For example: Rotate the model around Y axis by 30
o
.
Procedure: 1. Click ―Rotate‖; 2. Input 30 in the text box；3. Click ―Y axis‖.
Note: positive numbers rotate counterclockwise and negative numbers rotate clockwise.
Scaling the model: Click ―Scale‖, choose or input a scaling factor in the text box, and
then either scale the model uniformly by clicking the scale button again, or choose the
axis around which you want to scale if you only want to scale in one direction.
Example1: Scale up the model uniformly by 2.0 times.
Procedures: 1. Click ―Scale‖; 2. Input 2.0 in the text box; 3. Click ―Scale‖ again.
Example2: Scale up the model by 1.2 times along the Z axis only.
Procedures: 1. Click ―Scale‖; 2. Input 1.2 in the text box; 3. Click ―Z axis‖