User's Manual Part 1

Safety Precautions
Warning label:
High Temperature, do
not touch!
Warning Label:
Moving parts, do not
touch!
Printing Environment
1\
The UP mini 2 3D printer requires the power adapter provided by the original manufacturer,oth-
erwise the machine could be damaged or even cause a fire hazard. Please also keep the power
adapter away from water and out of high temperature environments.
4\ Please wear goggles when removing the supporting material from models and detaching
models from the perf board.
5\ When printing with ABS and PLA, the plastics will create a light odor. Please run the printer in a
well-ventilated environment. We also suggest you put the printer in an environment with a stable
temperature as unwanted cooling could cause adverse effects to the print quality.
When printer is exturding filament,make sure there is enough space between print head nozzle and
the platform. Otherwise the nozzle could be blocked.
As light odor will be produced during printing, please run the printer in a well-ventilated environment.
The UP mini 2's ideal working temperature is between 15°C and 30°C with a relative humidity
between 20–50%.
Printing at temperatures out of this range could cause adverse effects to the printing process. When
using the “Extrude” function, keep at least 50mm be-tween the nozzle and the platform. If too close,
the nozzle may get blocked.
2\ During printing, the nozzle of the printer will
reach 260°C and the print platform could reach
over 70°C. Please do not touch these parts with
your bare hands while they are hot—not even with
the heat resistant gloves included with the
machine—as the temperature could damage the
gloves and injure your hands.
3\ During printing, the printhead and other
mechanical parts move at high speeds. Touching
these parts while they are moving could casue
injuries.