User's Manual Part 1

1\ During printing process the
“Pause” but- ton, the printing job will
be paused.
2\ When print head stopped
moving and platfrom lowered. Press
the “Retract” but- ton to remove
filament.
After filament was removed, insert new
filament to the print head as described in
page 16.
Printer ready confirmation:
After the print job was finished, the user need
to press the “Ready for next print?” button to
confirm the printer is ready. User should make
sure the previous print job is removed from
the platform before pressing the button. The
printer cannot start a new print job if they did
not confirm the status.
Press the “Extrude button” to load
the new filament
Press the “resume” button to
resume print- ing.
Confirmation button
Change Filament During Printing
Print Job Finished