User's Manual
Table Of Contents
- 1.MAIN FEATURES
- 2.PINNING INFORMATION
- 3.Device Operation
- 4.COMMAND DESCRIPTION
- 4-2. Command Overview
- 4-3. COMMAND LIST
- 4-3-1. Select Mifare card
- 4-3-2. Login to a sector
- 4-3-3. Download Key into SL030
- 4-3-4. Login sector via stored key
- 4-3-5. Read a data block
- 4-3-6. Write a data block
- 4-3-7. Read a value block
- 4-3-8. Initialize a value block
- 4-3-9. Write master key (KeyA)
- 4-3-10. Increment value
- 4-3-11. Decrement value
- 4-3-12. Copy value
- 4-3-13. Read a data page (UltraLight & NTAG203)
- 4-3-14. Write a data Page (UltraLight & NTAG203)
- 4-3-15. Request for Answer to Select (ISO14443-4)
- 4-3-16. Exchange Transparent Data (T = CL)
- 4-3-17. LED Control
- 4-3-18. Power Down
- 4-3-19. Write Perso
- 4-3-20. Commit Perso
- 4-3-21. Get firmware version
- 4-3-22. Turn on/off Auto-detection
- 4-3. COMMAND LIST
- 5.DIFFERENCES FROM PREVIOUS VERSION
- FCC Statement
ORIGINALEQUIPMENTMANUF
ACTURER(OEM)NOTES
TheOEMmustcertifythefinalendproducttocomplywithunintentionalradiators(FCCSections15.107and
15.109)beforedeclaringcomplianceofthefinalproducttoPart15oftheFCCrulesandregulations.Integr ation
intodevicesthataredirectlyorindirectlyconnectedtoAClinesmu
staddwithClassIIPermissiveChange.
TheOEMmustcomplywiththeFCClabelingrequirements.Ifthemodule’slabelisnotvisiblewheninstalled,
thenanadditionalpermanentlabelmustbeappliedontheoutsideofthefinishedproductwhichstates:
“ContainstransmittermoduleFCCID:2ADI8-SL30120P.Additionally,the
followingstatementshouldbeincluded
onthelabelan
dinthefinalproduct’sus
ermanual:“ThisdevicecomplieswithPart15oftheFCCRules.
Operationissubjecttothefollowingtwoconditions:(1)Thisdevicemaynotcauseharmfulinterferences,and
(2)thisdevicemustacceptanyi
nterferencereceived,includinginterferencethatmaycauseundesired
operation.”
Themoduleislimitedtoinstallationinmobileorfixedapplications.Separateapprovalisrequiredforallother
operatingconfigurations,includingportableconfigurationwithrespecttoPart2.1093anddifferentantenna
configurations.
Amoduleormodulescanonlybeusedwithoutaddi
tionalauthorizationsiftheyhavebeentestedandgranted
underthesameintendedend‐useoperationalconditions,includingsimultaneoustransmissionoperations.
Whentheyhavenotbeentestedandgrantedinthismanner,additionaltestingand/orFCCapplicationfiling
mayberequired.Themoststraightforwardapproachtoaddressadditionaltestingcondition
sistohavethe
granteeresponsibleforthecertificationofatleastoneofthemodulessubmitapermissivechangeapplication.
Whenhavingamodulegranteefileapermissivechangeisnotpracticalorfeasible,thefollowingguidance
providessomeadditionaloptionsforhostmanufacturers.Integrationsusingmoduleswhereadditionaltesting
and/orFCCapplicationfiling(s)mayberequiredare:(A)amoduleusedindevi cesrequiringadditionalRF
exposurecomplianceinformation(e.g.,MPEevaluationorSARtesting);(B)limitedand/orsplitmodulesnot
meetingallofthemodulerequirements;and(C)simultaneoustransmissionsforindependentcollocated
transmittersnotpreviousl
ygrantedtogether.
This Module is full modular approval, it is limited to OEM installation ONLY.
Integration into devices that are directly or indirectly connected to AC lines must add with Class II Permissive Change.
(OEM) Integrator has to assure compliance of the entire end product incluld the integrated Module.
Additional measurements (15B) and/or equipment authorizations (e.g Verification) may need to be addressed
depending on co-location or simultaneous transmission issues if applicable.
(OEM) Integrator is reminded to assure that these installation instructions will not be made available to the end user
of the final host device.
Test with the host (host model:T030, brand:StrongLink)