User's Manual
Table Of Contents
- 1. FEATURES
- 2. DESCRIPTION
- 3. PINNING INFORMATION
- 4. Communication Protocol
- 4.1 Communication Setting
- 4.2 Communication Format
- 4.3 Command Overview
- 4-4. Command List
- 4-4-1 System Function Command
- 4-4-2 ISO14443A - Mifare Function Command
- 4-4-2-1. Request(Card A)
- 4-4-2-2. Anticollision(Card A)
- 4-4-2-3. Select card (Card A)
- 4-4-2-4. Halt (Card A)
- 4-4-2-5. Authenticate
- 4-4-2-6. Read block
- 4-4-2-7. Write block
- 4-4-2-8. Initialize electronic purse
- 4-4-2-9. Read purse value
- 4-4-2-10. Decrease purse value (including Transfer)
- 4-4-2-11. Increase purse value (including Transfer)
- 4-4-2-12. Restore purse value
- 4-4-2-13. Transfer
- 4-4-2-14. Get ATS of CPU A
- 4-4-2-15. Exchange data between PICC and PCD according with T = CL protocol
- 4-4-2-16. Ultralight card Anticoll and Select
- 4-4-2-17. Write a page of data into ultralight card
- 4-4-2-18. Authenticate password of Ultralight_C
- 4-4-2-19. Change password of Ultralight_C
- 4-4-2-20. SHC1102 card check password
- 4-4-2-21. Read data block of SHC1102 card
- 4-4-2-22. Write data block of SHC1102 card
- 4-4-2-23. Request DESFire and reset
- 4-4-2-24. Get version of Ntag213/216
- 4-4-2-25. Read page of data of Ntag213/216
- 4-4-2-26. Fast read page of data of Ntag213/216
- 4-4-2-27. Get NFC counter of Ntag213/216
- 4-4-2-28. Authenticate password of Ntag213/216
- 4-4-3 NFC Function Command
StrongLink SL060
http://www.stronglink-rfid.com
7
Attention
If there is any byte equaling to AA occurs between Len and Checksum, one byte 00 will
be added after this byte to differentiate preamble. However, the Len keeps unchanged.
Example, reading data (0x00112233445566778899AABBCCDDEEFF) from block 1
SL060 -> Host：ABB1600000009020000112233445566778899AA00BBCCDDEEFF0B
4.3 Command Overview
Tab le 1
Command
Description
0x0101
Set baud rate
0x0201 Initialize the Device ID
0x0303 Get device ID
0x0401 Get hardware vision
0x0701 Set the LED
0x0C01 Set the RF field
0x0102 Request(Card A)
0x0202 Anticollision (Card A)
0x0302 Select card(Card A)
0x0402
Halt(Card A)
0x0702 Authenticate
0x0802 Read block
0x0902 Write block
0x0A02 Initialize electronic purse
0x0B02 Read purse value
0x0C02 Decrease purse value (including Transfer)
0x0D02
Increase purse value (including Transfer)
0x0E02 Restore purse value
0x0F02 Transfer
0x1002
Get ATS of CPU A
0x1102
Exchange data between PICC and PCD according with T = CL protocol
0x1202 Ultralight card Anticoll and Select
0x1302 Write a page of data into ultralight and Ntag card
0x4002
Authenticate password of Ultralight_C
0x4102
0x4202 Change password of Ultralight_C
0x2002 SHC1102 card check password
0x2102 Read data block of SHC1102 card
0x2202 Write data block of SHC1102 card
0x3002
Request DESFire and reset
0x5002
Get version of Ntag213/216
0x5102 Read page of data of Ntag213/216
0x5202 Fast read page of data of Ntag213/216
0x5302 Get NFC counter of Ntag213/216