User's Manual
Table Of Contents
- 1. FEATURES
- 2. DESCRIPTION
- 3. PINNING INFORMATION
- 4. Communication Protocol
- 4.1 Communication Setting
- 4.2 Communication Format
- 4.3 Command Overview
- 4-4. Command List
- 4-4-1 System Function Command
- 4-4-2 ISO14443A - Mifare Function Command
- 4-4-2-1. Request(Card A)
- 4-4-2-2. Anticollision(Card A)
- 4-4-2-3. Select card (Card A)
- 4-4-2-4. Halt (Card A)
- 4-4-2-5. Authenticate
- 4-4-2-6. Read block
- 4-4-2-7. Write block
- 4-4-2-8. Initialize electronic purse
- 4-4-2-9. Read purse value
- 4-4-2-10. Decrease purse value (including Transfer)
- 4-4-2-11. Increase purse value (including Transfer)
- 4-4-2-12. Restore purse value
- 4-4-2-13. Transfer
- 4-4-2-14. Get ATS of CPU A
- 4-4-2-15. Exchange data between PICC and PCD according with T = CL protocol
- 4-4-2-16. Ultralight card Anticoll and Select
- 4-4-2-17. Write a page of data into ultralight card
- 4-4-2-18. Authenticate password of Ultralight_C
- 4-4-2-19. Change password of Ultralight_C
- 4-4-2-20. SHC1102 card check password
- 4-4-2-21. Read data block of SHC1102 card
- 4-4-2-22. Write data block of SHC1102 card
- 4-4-2-23. Request DESFire and reset
- 4-4-2-24. Get version of Ntag213/216
- 4-4-2-25. Read page of data of Ntag213/216
- 4-4-2-26. Fast read page of data of Ntag213/216
- 4-4-2-27. Get NFC counter of Ntag213/216
- 4-4-2-28. Authenticate password of Ntag213/216
- 4-4-3 NFC Function Command
StrongLink SL060
http://www.stronglink-rfid.com
5
2. DESCRIPTION
Being developed based on NXP’s NFC transponder IC, NFC Module SL060 is a
mini NFC reader/writer. This RFID module supports MIFARETM Classic 1K,
MIFARE
TM
Classic 4K, MIFARE Ultralight
TM,
MIFARE DESFire
TM
and NFC
NFCIP-1 mode. The maximum working current is less than 50mA. It integrates all
necessary components and antenna in the PCB.
SL060 can offer NFCIP-1 functions. Users can send NFC message to NFC device to
open a web URL or display text words in the window.
3. PINNING INFORMATION
PIN SYMBOL TYPE DESCRIPTION
1 VCC PWR Power supply, 2.5 to 3.6VDC
2 IO0 NA Reserved for future use
3 TXD Output UART TX
4 RXD Input UART RX
5 IO1 NA Reserved for future use
6 GND PWR GND