User's Manual
Table Of Contents
- 1. FEATURES
- 2. DESCRIPTION
- 3. PINNING INFORMATION
- 4. Communication Protocol
- 4.1 Communication Setting
- 4.2 Communication Format
- 4.3 Command Overview
- 4-4. Command List
- 4-4-1 System Function Command
- 4-4-2 ISO14443A - Mifare Function Command
- 4-4-2-1. Request(Card A)
- 4-4-2-2. Anticollision(Card A)
- 4-4-2-3. Select card (Card A)
- 4-4-2-4. Halt (Card A)
- 4-4-2-5. Authenticate
- 4-4-2-6. Read block
- 4-4-2-7. Write block
- 4-4-2-8. Initialize electronic purse
- 4-4-2-9. Read purse value
- 4-4-2-10. Decrease purse value (including Transfer)
- 4-4-2-11. Increase purse value (including Transfer)
- 4-4-2-12. Restore purse value
- 4-4-2-13. Transfer
- 4-4-2-14. Get ATS of CPU A
- 4-4-2-15. Exchange data between PICC and PCD according with T = CL protocol
- 4-4-2-16. Ultralight card Anticoll and Select
- 4-4-2-17. Write a page of data into ultralight card
- 4-4-2-18. Authenticate password of Ultralight_C
- 4-4-2-19. Change password of Ultralight_C
- 4-4-2-20. SHC1102 card check password
- 4-4-2-21. Read data block of SHC1102 card
- 4-4-2-22. Write data block of SHC1102 card
- 4-4-2-23. Request DESFire and reset
- 4-4-2-24. Get version of Ntag213/216
- 4-4-2-25. Read page of data of Ntag213/216
- 4-4-2-26. Fast read page of data of Ntag213/216
- 4-4-2-27. Get NFC counter of Ntag213/216
- 4-4-2-28. Authenticate password of Ntag213/216
- 4-4-3 NFC Function Command
Simultaneous Transmission Evaluation
This module has not been evaluated or approved for simultaneous transmission as it is
impossible to determine the exact multi-transmission scenario that a host manufacturer may
choose. Any simultaneous transmission condition established through module integration into a
host product must be evaluated per the requirements in KDB447498D01(8) and
KDB616217D01,D03 (for laptop, notebook, netbook, and tablet applications).
These requirements include, but are not limited to:
Transmitters and modules certified for mobile or portable exposure conditions can be
incorporated in mobile host devices without further testing or certification when:
The closest separation among all simultaneous transmitting antennas is >20 cm,
Or
Antenna separation distance and MPE compliance requirements for ALL simultaneous
transmitting antennas have been specified in the application filing of at least one of the
certified transmitters within the host device. In addition, when transmitters certified for
portable use are incorporated in a mobile host device, the antenna(s) must be >5 cm
from all other simultaneous transmitting antennas.
All antennas in the final product must be at least 20 cm from users and nearby persons.