User's Manual
Table Of Contents
- 1. FEATURES
- 2. DESCRIPTION
- 3. PINNING INFORMATION
- 4. Communication Protocol
- 4.1 Communication Setting
- 4.2 Communication Format
- 4.3 Command Overview
- 4-4. Command List
- 4-4-1 System Function Command
- 4-4-2 ISO14443A - Mifare Function Command
- 4-4-2-1. Request(Card A)
- 4-4-2-2. Anticollision(Card A)
- 4-4-2-3. Select card (Card A)
- 4-4-2-4. Halt (Card A)
- 4-4-2-5. Authenticate
- 4-4-2-6. Read block
- 4-4-2-7. Write block
- 4-4-2-8. Initialize electronic purse
- 4-4-2-9. Read purse value
- 4-4-2-10. Decrease purse value (including Transfer)
- 4-4-2-11. Increase purse value (including Transfer)
- 4-4-2-12. Restore purse value
- 4-4-2-13. Transfer
- 4-4-2-14. Get ATS of CPU A
- 4-4-2-15. Exchange data between PICC and PCD according with T = CL protocol
- 4-4-2-16. Ultralight card Anticoll and Select
- 4-4-2-17. Write a page of data into ultralight card
- 4-4-2-18. Authenticate password of Ultralight_C
- 4-4-2-19. Change password of Ultralight_C
- 4-4-2-20. SHC1102 card check password
- 4-4-2-21. Read data block of SHC1102 card
- 4-4-2-22. Write data block of SHC1102 card
- 4-4-2-23. Request DESFire and reset
- 4-4-2-24. Get version of Ntag213/216
- 4-4-2-25. Read page of data of Ntag213/216
- 4-4-2-26. Fast read page of data of Ntag213/216
- 4-4-2-27. Get NFC counter of Ntag213/216
- 4-4-2-28. Authenticate password of Ntag213/216
- 4-4-3 NFC Function Command
Regulatory Module Integration Instructions
This module has been granted modular approval for mobile applications. OEM integrators for host
products may use the module in their final products without additional FCC certification if they
meet the following conditions. Otherwise, additional FCC approvals must be obtained.
The host product with the module installed must be evaluated for simultaneous
transmission requirements.
The users manual for the host product must clearly indicate the operating requirements
and conditions that must be observed to ensure compliance with current FCC RF
exposure guidelines.
To comply with FCC regulations limiting both maximum RF output power and human
exposure to RF radiation.
A label must be affixed to the outside of the host product with the following statements:
This device contains FCC ID: 2ADI8-SL060
The final host / module combination may also need to be evaluated against the FCC Part 15B
criteria for unintentional radiators in order to be properly authorized for operation as a Part 15
digital device.
If the final host / module combination is intended for use as a portable device (see classifications
below) the host manufacturer is responsible for separate approvals for the SAR requirements
from FCC Part 2.1093.