User's Manual
Table Of Contents
- Main Features
- 2. PINNING INFORMATION
- 3. baud rate Setting
- 4. Communication Protocol
- 4-1. Communication Setting
- 4-2. Communication Format
- 4-3. Command Overview
- 4-4. Command List
- 4-4-1. Select Mifare card
- 4-4-2. Login to a sector
- 4-4-3. Download Key into SL025
- 4-4-4. Login sector via stored key
- 4-4-5. Read a data block
- 4-4-6. Write a data block
- 4-4-7. Read a value block
- 4-4-8. Initialize a value block
- 4-4-9. Write master key (key A)
- 4-4-10. Increment value
- 4-4-11. Decrement value
- 4-4-12. Copy value
- 4-4-13. Read a data page (UltraLight & NTAG203)
- 4-4-14. Write a data Page (UltraLight & NTAG203)
- 4-4-15. Manage Red Led
- 4-4-16. Get firmware version
StrongLink SL025M
http://www.stronglink-rfid.com
11
Response:
0xBD
Len
0x10
Status
Data
Checksum
Status: 0x00: Operation succeed
0x01: No tag
0x04: Read fail
0x08: Address overflow
0xF0: Checksum error
Data: Block data returned if operation succeeds, 4 bytes.
4-4-14. Write a data Page (UltraLight & NTAG203)
0xBA
Len
0x11
Page
Data
Checksum
Page: The page number to be written, 0x00 – 0x0F
Data: The data to write, 4 bytes.
Response:
0xBD
Len
0x11
Status
Data
Checksum
Status: 0x00: Operation succeed
0x01: No tag
0x05: Write fail
0x06: Unable to read after write
0x08: Address overflow
0xF0: Checksum error
Data: Page data written if operation succeeds, 4 bytes.
4-4-15. Manage Red Led
0xBA
Len
0x40
Code
Checksum
Code: 0 command red led turn off , other red led turn on, 1 byte
Return:
0xBD
Len
0x40
Status
Checksum
Status: 0x00: Operation succeed
0xF0: Checksum error
4-4-16. Get firmware version
0xBA
Len
0xF0
Checksum
Response:
[3]
0xBD
Len
0xF0
Status
Data
Checksum
Status: 0x00: Operation success
0xF0: Checksum error
Data: firmware version.