User's Manual
Table Of Contents
- Main Features
- 2. PINNING INFORMATION
- 3. baud rate Setting
- 4. Communication Protocol
- 4-1. Communication Setting
- 4-2. Communication Format
- 4-3. Command Overview
- 4-4. Command List
- 4-4-1. Select Mifare card
- 4-4-2. Login to a sector
- 4-4-3. Download Key into SL025
- 4-4-4. Login sector via stored key
- 4-4-5. Read a data block
- 4-4-6. Write a data block
- 4-4-7. Read a value block
- 4-4-8. Initialize a value block
- 4-4-9. Write master key (key A)
- 4-4-10. Increment value
- 4-4-11. Decrement value
- 4-4-12. Copy value
- 4-4-13. Read a data page (UltraLight & NTAG203)
- 4-4-14. Write a data Page (UltraLight & NTAG203)
- 4-4-15. Manage Red Led
- 4-4-16. Get firmware version
StrongLink SL025M
http://www.stronglink-rfid.com
6
4-3. Command Overview
Table 3
Command
Description
0x01
Select Mifare card
0x02
Login to a sector
0x03
Read a data block
0x04
Write a data block
0x05
Read a value block
0x06
Initialize a value block
0x07
Write master key (key A)
0x08
Increment value
0x09
Decrement value
0x0A
Copy value
0x10
Read a data page (UltraLight & NTAG203)
0x11
Write a data page (UltraLight & NTAG203)
0x12
Download Key
0x13
Login sector via stored Key
0x40
Manage Red Led
0xF0
Get firmware version
Status Overview
Table 4
Status
Description
0x00
Operation succeed
0x01
No tag
0x02
Login succeed
0x03
Login fail
0x04
Read fail
0x05
Write fail
0x06
Unable to read after write
0x08
Address overflow
0x09
Download Key fail
0x0D
Not authenticate
0x0E
Not a value block
0xF0
Checksum error
0xF1
Command code error