User's Manual
Table Of Contents
- Main Features
- 2. PINNING INFORMATION
- 3. baud rate Setting
- 4. Communication Protocol
- 4-1. Communication Setting
- 4-2. Communication Format
- 4-3. Command Overview
- 4-4. Command List
- 4-4-1. Select Mifare card
- 4-4-2. Login to a sector
- 4-4-3. Download Key into SL025
- 4-4-4. Login sector via stored key
- 4-4-5. Read a data block
- 4-4-6. Write a data block
- 4-4-7. Read a value block
- 4-4-8. Initialize a value block
- 4-4-9. Write master key (key A)
- 4-4-10. Increment value
- 4-4-11. Decrement value
- 4-4-12. Copy value
- 4-4-13. Read a data page (UltraLight & NTAG203)
- 4-4-14. Write a data Page (UltraLight & NTAG203)
- 4-4-15. Manage Red Led
- 4-4-16. Get firmware version
StrongLink SL025B
http://www.stronglink-rfid.com
4
2. PINNING INFORMATION
Connector: Würth Elektronik
653 105 131 822
PIN
SYMBOL
TYPE
DESCRIPTION
1 TagSta Output
Tag detect signal, RS232 level
Logic 0 ind icating tag in detection range
Logic 1 indicating tag out
2
TXD
Output
Serial output port
3
RXD
Input
Serial input port
4
VCC
PWR
Power Supply
5
GND
PWR
Ground