User's Manual
Table Of Contents
- Main Features
- 2. PINNING INFORMATION
- 3. baud rate Setting
- 4. Communication Protocol
- 4-1. Communication Setting
- 4-2. Communication Format
- 4-3. Command Overview
- 4-4. Command List
- 4-4-1. Select Mifare card
- 4-4-2. Login to a sector
- 4-4-3. Download Key into SL025
- 4-4-4. Login sector via stored key
- 4-4-5. Read a data block
- 4-4-6. Write a data block
- 4-4-7. Read a value block
- 4-4-8. Initialize a value block
- 4-4-9. Write master key (key A)
- 4-4-10. Increment value
- 4-4-11. Decrement value
- 4-4-12. Copy value
- 4-4-13. Read a data page (UltraLight & NTAG203)
- 4-4-14. Write a data Page (UltraLight & NTAG203)
- 4-4-15. Manage Red Led
- 4-4-16. Get firmware version
StrongLink SL025B
http://www.stronglink-rfid.com
3
1. MAIN FEATURES
• Tags supported: Mifare 1k, Mifare 4k, Mifare UltraLight and NFC
NTAG203
• Auto-detecting tag, Built-in antenna
• RS232 interface, baud rate 9,600 ~ 115,200 bps
• 4.4 ~ 12.0VDC power supply
• Work current less than 80mA
• Operating distance: Up to 70mm, depending on tag
• Storage temperature: -40 ºC ~ +85 ºC
• Operating temperature: -25 ºC ~ +70 ºC
• Dimension: 86 × 55 mm
• Two LEDs, green led is auto light when tag in detection range, red led
is controlled by host
• The OUT pin at low level indicates tag in detective range, and high
level indicating tag out
• Support IAP firmware update