User's Manual

29
Routine Maintenance
To maintain optimum performance, maintain the robot according to the following guidelines:
Part
Maintenance
Frequency
Omni-Directional
Wheel
Use a screwdriver or similar tool to pry out the axles.
Rinse, allow to dry and press the wheel back in place.
As required
/
Charging Contacts
(Robot)
Wipe clean with a soft dry cloth.Monthly /
Cli Sensors Wipe clean with a soft dry cloth.Monthly /
Main Brush
Rotate in the Unlock direction and remove. Extract any
entangled dirt then reinstall.
2 weeks 6-12 months
Charging Contacts
(Charging Dock)
Wipe clean with a soft dry cloth.Monthly /
Carpet Sensor Wipe clean with a soft dry cloth.Monthly /
Washable Filter 2 weeks 6-12 months
Remove and rinse, gently tapping to remove any dirt.
Air-dry for at least 24h before reuse.
Use a screwdriver to unscrew the side brush. Remove any
entangled dirt and screw it back in place.
Side Brush Monthly 3-6 months
Remove and clean the mop after each use.Mop Cloth After each use 3-6 months
Dock Locator Wipe clean with a soft dry cloth.Monthly /
Main Wheels Wipe clean with a soft dry cloth.Monthly /
Replacement
Frequency
Maintenance Method
Note: Replacement frequency will vary depending on the actual situation. Should abnormal wear and tear occur, replace the relevant part.