User's Manual

21
Mopping the oor
Note: To prevent excessive buildup of dirt on the mop, oors should be vacuumed at
least three times before the rst mopping cycle.
Click
1. Remove the water tank
2. Fill the water tank
Release the water tank latch and slide the tank backward.
Open the water tank, ll it with water, and close it tightly.
3. Reinstall the water tank
Slide the water tank along the grooves until you hear it click in
place.
Note:
•
Fill with water only. Cleaning uids and/or disinfectants may corrode the water
tank.
•
Use cold/room temperature water only. Hot water may cause water tank defor-
mation.
3
4. Install the mop cloth
Wet the mop cloth and squeeze to remove excess water. Slide it
along the attachment slot and stick it rmly in place.
Installation