User's Manual

20
More than
0.5m (1.6ft)
More than
0.5m (1.6ft)
More than
1.5m (4.9ft)
Power on and charge the robot
Press and hold the button to power on the robot. When
the power light goes on, place it on the dock to charge. To
maintain the performance of the high-performance lithium-ion
rechargeable battery pack, keep the robot charged.
Position the charging dock
Keep the charging dock on a level surface, at against a wall.
Connect the power cable to the charging dock and place any
loose wire into the cable slot. To ensure a better mobile app
experience, place the charging dock in an area with strong
WiFi coverage.
Note: The robot may not turn on when the battery is low. In this case, place the robot
directly onto the dock to charge.
The power indicator color
indicates the battery level.
•
White: Battery level
≥
20%
•
Red: Battery level < 20%
Note:
•
Keep least 0.5m (1.6ft) on each side and 1.5m (4.9ft) in front of the charging dock
clear.
•
If the power cable hangs vertically, it may be caught by the robot, causing the
charging dock to be disconnected.
•
The charging dock indicator is lit when the charging dock is powered up, and o when
the robot is charging.
•
Do not place the charging dock in direct sunlight or block the location beacon, as the
robot may not be able to return.
Installation
1
2