User's Manual

Installation

Using the Robot

Remove the water tank

Reinstall the water tank

Fill the water tank

Install the mop cloth

①

③

②

④

Press the water tank latch and slide the tank backwards.

Slide the water tank into the robot until you hear it lock with a click.

Open the water tank, ll it with water, and close it tightly.

Dampen the mop cloth and wring it until it stops dripping. Insert it into

the bottom along the slot of the water tank and stick it rmly in place.

Note:

Use virtual barriers and no-mop zones to prevent the robot mopping carpeted oors.

Note:

To prevent corrosion or damage, do not use cleaning uid or disinfectant in the water tank.

Do not use hot water as this may cause the tank to deform.

Mopping the oor6.

Note:

To prevent excessive dirt buildup on the mop, oors should be vacuumed at least three times before

the rst mopping session.

・