User's Manual

Attach the Moisture-Proof Mat3.

After xing the Charging Dock in place, use a dry cloth to clean the area

where the Moisture-Proof Mat will be located. Peel o the outer layer

of the double-sided tape attached to the bottom of the Moisture-Proof

Mat, and stick the mat to the ground as shown.

Note:

The robot may not be turned on when the battery is low. In this case, connect the robot to the

Charging Dock.

Powering On and Charging4.

Press and hold the button to power on the robot. Wait until the

power light is steady, and then place the robot on the Charging Dock to

charge. The robot is equipped with a built-in high performance lithium-

ion rechargeable battery pack. To maintain battery performance, keep

the robot charged during normal use.

The color of the power

indicator indicates the

battery level.

・

White:

≥

20%;

Red: < 20%

Note:

Always place the Moisture-Proof Mat on wooden 󽘁oors.

Peel the double-sided tape slowly to minimize residual adhesive.

The Moisture-Proof mat attaches better to smooth surfaces.

・

Installation