Roborock X7 WashVac Robotic Vacuum Cleaner User Manual Read this user manual carefully before using this product and store it properly for future reference.
Safety Information IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING (THIS APPLIANCE). Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. WARNING To reduce the risk of fire, electric shock, or injury: • Do not use outdoors or on wet surfaces. • Do not allow to be used as a toy.
Safety Information • Use appliances only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire. • Turn off the appliance before making any adjustments, changing accessories, or storing appliance. Such preventive safety measures reduce the risk of starting the appliance accidentally.
Safety Information SAVE THESE INSTRUCTIONS Household use only. Laser Safety Class 1 laser product,Complies with FDA 21 CFR 1040.10 and 1040.11 except for conformance with IEC 60825-1 Ed. 3., as described in Laser Notice 56, dated May 8, 2019.
FCC IC Statement Compliance Information Product Name Robotic Vacuum Cleaner with Dock Charger Product Model Robotic Vacuum Cleaner Model: X170RR Dock Charger Model: CDZ18RR or CDZ19RR Compliance Statement This device complies with part 15 of the FCC Rules. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s).
FCC IC Statement L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Battery and Charging • Keep the charging dock away from heat (such as radiators). • Do not wipe the charging contacts with wet cloth or wet hands. • Turn the robot off and use original packaging for shipment. • If placing the robot into storage, charge it fully and turn if off before placing it in a cool dry place. Recharge it at least every three months to prevent the battery over discharging.
Holiday Energy Saving Function When the robot is docked, press and hold “Dock” for 10 seconds or until you hear an alert sound. This will activate Holiday mode. In this mode the robot will switch to Low Power mode to minimize power consumption. This includes a dimming of the LED indicator, and the stopping of all non-charging related functions including cleaning, remote control over WiFi, and more. To deactivate Holiday mode, press and hold “Dock” for 10 seconds until the LED indicator brightens.
Product Overview Package Contents Robot Dock • Press to return to dock • Press and hold to return for mop washing Clean/Power • Press to start cleaning • Press and hold to turn the robot on or off Power Indicator Robot Cleaning Dock • White: ≥ 20% • Red: < 20% • Pulsing: Charging or starting up • Flashing red: Error Robot Mop • Press to mop Child Lock Power Cable , • Press and hold , and simultaneously for 3 seconds to turn on/off the child lock Note: Press any button to stop the robot during cleaning
Product Overview Robot Cliff Sensor WiFi Indicator Omni-Directional Wheel Reset Button Vertical Bumper Roller Cover Latches Laser Distance Sensor Air Outlet Main Wheel Side Brush Main Brush Charging Contacts Mop Roller Wall Sensor Carpet Sensor Bumper Sensor Dock Locator 10
Product Overview Vacuum/Mop Rollers Dustbin Mop Roller Cap Mop Roller Bearing Mop Roller Main Brush Dustbin Latch Main Brush Cap Dustbin Cover Main Brush Bearing Roller Cover Latches Side Brush Washable Filter Side Brush Catch 11
Product Overview Robot Cleaning Dock Handle Indicator Light Recharge Positioning Stoppers Power Port Location Beacon Charging Contacts Dock Location Beacon Cable Slot Air-Dry Fan Inlet Guide Wheels Cable Outlet Note: Power cable can be pulled out at both sides.
Product Overview Robot Cleaning Dock Water Filters Top Cover Water Tank Handle Primary Water Filter Water/Detergent Filling Port Clean Water Tank Water Tank Latch Secondary Water Filter Dirty Water Tank Cleaning Strip 13 Filter Handle Water Level Float
Installation Important Information 1. Tidy cables and loose items from the ground and move any unstable, fragile, precious, or dangerous items to prevent personal injury or property damage due to items becoming tangled in, struck by, or knocked over by the robot. 2. When using the robot in a raised area, always use a secure physical barrier to prevent accidental falls that may result in personal injury or property damage.
Installation Positioning the Robot Cleaning Dock Powering On & Charging Keep the dock on a hard level surface, flat against a wall. Connect the power cable to the dock and place any exposed cable into the cable slot. To ensure a better user experience of the mobile app, place the dock in an area with good WiFi coverage. Press and hold the button to power on the robot. Wait until the power light is steady, and then place the robot on the dock to charge.
