Users Manual Part 2
22
Routine Maintenance
2. Rinse the lter repeatedly and tap it to remove as much dirt as
possible.
3. Leave the lter to dry and reinstall it.
Note:
•
Do not touch the surface of the lter with your hands, brush, or hard objects to avoid
potential damage.
•
Make sure that the lter is completely dry before use.
•
Purchase an additional lter to alternate.
Note:
•
To prevent corrosion or damage, do not use cleaning uid or disinfectant not specied by Roborock in the water
tank.
•
Do not use hot water as this may cause the tank to deform.
•
If any water stains remain on the outside of the water tank, wipe them with a soft dry cloth before reinstalling the
tank.
Water Tank
Open the water tank lid and pour out the dirty water. Fill the tank with clean water,
close the lid, and shake. Pour out the dirty water. Close the lid and then re-install.
Blur the tank’s
characteristics
Move the handle to the
top