Users Manual Part 2

Instructions for Use

Pause

When the robot is running, press any button to pause it, or press the button to

send it back to the dock.

When the robot is paused, press the

button to continue vacuuming, or press the

button to continue mopping.

Note: Placing a paused robot on the dock manually will end the current task.

DND Mode

The default DND period is from 22:00 to 08:00. You can use the app to disable the

DND mode or modify the DND period.

When Do Not Disturb is on, the auto top-up is canceled, voice alerts are quietened,

indicator lights are dimmed, and mop air drying is paused.

Child Lock

Press and hold the , , and buttons simultaneously to enable/disable the

child lock. You can also set it in the app.

Once enabled, the robot will not react to button presses when it is stationary.

When the robot is vacuuming, mopping or docking, press any button to pause it.

Sleep

If the robot is paused for over 10 minutes, it will go to sleep, and the power indica-

tor will ash every few seconds. Press any button to wake it up.

Note:

•

The robot will not go to sleep when it is charging.

•

The robot will automatically shut down if left in sleep mode for more than 12 hours.

Charging

After cleaning, the robot will automatically return to the dock to charge. In Pause

mode, press the button to send the robot back to the dock. The power indicator

will pulse as the robot charges.

Note:

If the robot fails to nd the dock, it will automatically return to its starting location. Place the robot on the

dock manually to recharge.

Resetting the System

If the robot does not respond when a button is pressed or cannot be turned o,

reset the system. Press the Reset button, and the robot will restart automatically.

Note: After resetting the system, scheduled cleaning, WiFi, etc. will be restored to

factory settings.

Restoring Factory Settings

If the robot does not function properly after a system reset, switch it on, and press

and hold both the and Reset buttons until you hear the "Start restoring initial

settings" voice alert. The robot will then be restored to factory settings.