Users Manual Part 2

26
Removing
the Battery
The following information applies only when disposing of the robot and should not
be followed for day-to-day operations.
The chemical substances contained in the built-in lithium-ion battery of this prod-
uct can cause environmental pollution. Remove the battery before disposing of
this product and hand it to a professional battery recycling facility for centralized
disposal.
1. Operate the robot without connecting to the dock until it runs out of battery.
2. Turn o the robot.
3. Unscrew the battery cover.
4. Remove the battery cover.
5. Press the latch to pull out the battery connector and remove the battery.
Note:
•
Before removing the battery, make sure it is fully drained. Do not attempt to remove the battery if the robot is
connected to the dock.
•
Remove the entire battery pack. Avoid damaging the battery pack casing to avoid short-circuits or leakage of
hazardous substances.
•
In the event of accidental contact with battery uid, rinse thoroughly with water and seek immediate medical care.
Environment Protection Informa-
tion
Troubleshooting
Malfunction with the Robot
Malfunction with the Dock
The power indicator of the robot will ash red and a voice alert will sound. Follow
the voice prompts and instructions in the app for troubleshooting.
The indicator of the dock will be steady red and a voice alert will sound. Follow the
voice prompts and instructions in the app for troubleshooting.
Note:
Note:
•
The robot will go to sleep automatically if left in a malfunctioning state for over 10 minutes.
•
Placing a malfunctioning robot on the dock manually will end the current task.
•
The robot will automatically end mopping and return to the dock to charge if the dock is
left in a malfunctioning state for over 10 minutes.
•
The robot will automatically start mop washing once the malfunction is manually xed.