Users Manual Part 1

15
> 0.3 m (1.0
ft)
> 0.3 m (1.0
ft)
> 1 m (3.3 ft)
Powering On & Charging
Press and hold the button to power on the robot. Wait until the power light is
steady, and then place the robot on the dock to charge. The robot is equipped with
a built-in high-performance lithium-ion rechargeable battery pack. To maintain
battery performance, keep the robot charged during normal use.
Positioning the Robot Cleaning Dock
Keep the dock on a hard level surface, at against a wall. Connect the power cable
to the dock and place any exposed cable into the cable slot. To ensure a better user
experience of the mobile app, place the dock in an area with good WiFi coverage.
Note: The robot may not be turned on when the battery is low. In this case,
connect the robot to the dock.
The color of the
power indicator
indicates the
battery level.
•
White:
≥
20%
•
Red: < 20%
Note:
•
Allow more than 0.3 m (1 ft) of clearance on each side, and 1.0 m (3.3 ft) in front of the
dock.
•
If the power cable hangs vertical to the ground, it may be caught by the robot, caus-
ing the dock to be moved or disconnected.
•
The dock indicator is on when the dock is powered on, and o when the robot is
charging.
•
Keep the dock away from direct sunlight or anything that may block the dock location
beacon; otherwise, the robot may fail to return to the dock.
•
All docks are subject to water-based tests before leaving the factory. It is normal that
a small amount of water remains in the waterway of the dock.
Installation