User's Guide

AXIS STUDIO USER GUIDE 4
2. Place the sensors into the bases. Rotate the sensors 90 degrees clockwise.
2.4. Transceiver Setup
Tip: USB mode can be used when one transceiver and one PN STUDIO is in operation.
USB connection
When attaching the Transceiver to the computer for the first time, the IP address for the TRANSCEIVER
Remote Network Driver Interface ( RNDIS ) needs to be configured.
1. Connect the USB to the Transceiver
2. Connect the USB to the Computer
3. Open Network Connections:
Control Panel Network and Internet Network and Sharing Center Change Adapter Settings