User's Guide

AXIS STUDIO USER GUIDE 27
8. Troubleshooting
8.1 Anti-mag Mode
If you are using Perception Neuron Studio Inertial System in a location with strong magnetic interference,
such as steel container, you can use our “Anti-mag mode”. Use the following steps:
1. Turn on all sensors and find a place with good magnetic environment (Sensor map will display all green).
2. Perform posture calibration at the position with sensor map status all green.
3. Click the button with the magnetic icon to activate Anti-mag mode in the sensors. The button will
become , then sensors LED lights will turn into solid light indicating sensor will not use magnetic data
for the reference.
4. Once Anti-mag mode has been activated, motion can be captured in the strong magnetic area.
5. Different movement types and speed can cause the posture of the avatar to drift after 5-10 minutes. Go
back to the good magnetic environment, click the button to turn the Anti-Mag mode off, stand still
and wait for the posture to be corrected in a few seconds. Then you will be able to do another 5-10 minutes
motion capture work with Anti-Mag mode.
Slow Blink Sensor in standby mode to save the power
Fast Blink Sensor in working mode, calculating the transferring the data
Solid light (green, blue, purple)
There is magnetic interference environment around the sensor or
the sensor is in Anti-Mag mode.
Solid light (red) Sensor malfunction, please turn off and turn on the sensor manually.
Green light Sensor in channel 1
Blue light Sensor in channel 2
Purple light Sensor in channel 3
Cyan light Sensor in channel 4
White light Sensor in channel 5
8.2 Sensor Light Instruction