User's Guide

AXIS STUDIO USER GUIDE 23
7.2. Magnetic Calibration
When operating Perception Neuron Studio Inertial System in new environments, we suggest users to
perform a magnetic calibration at the same location you'll capture motion. Please follow the steps below:
1. Turn on all the 18 sensors (17 and the back up one) in the charging case and link sensor , do not
remove sensors from the charging case. Please confirm that the gloves (if you have) are turned off.
2. Locate an area where all sensors display a magnetic green status in the Device Detail panel. Perform
compass calibration at the found location.
3. Place sensors in sleep mode by clicking on the button
4. Click Compass Calibrate from the Menu options.