User's Manual
Table Of Contents
11
3.3.Electric parameter
The power input can be provided only when the device is connected properly. If the device is plugged or unplugged while the cable is live (hot plugging), its
electronic components will be damaged. Make sure that the power is turned off when plugging and unplugging the cable. Poor power supply, too short interval
power off and on operation may cause the device cannot work in a stable and normal status. It is necessary to keep the power input stable. After turning off the
power input, it need to takes more than 2 seconds to turn on the power input again.
Electric parameter
Working voltage
DC 5V-24V
Working current
200mA(5V typical value)
Power consumption
1000mW(5V typical value)
3.4.Working environment
Work environment parameter
ESD protection
±8kV(Air discharge),±4kV(contact discharge)
Working temp
-20°C-65°C
Storge temp
-40°C-80°C
RH
5%-95%(No condensation)(environment temperature)
Ambient light
0-100000Lux( Non direct sunlight )