User's Manual

Welcome to use LANBE serial product
User Manual：
PRODUCT INTRODUCTION
MVS201（202 / 204）/ MVS401（402）video switch and splitter is a kind
of device which can switch 2 (MVS202 / MVS204) or 4(MVS401 / MVS402)
input video signals to 1/2/4 output video signals. The device is an active device.
It amplifies and rectifies the output signal and ensures the high output gain, high
bandwidth, high resolution and high reliability of the output signal. It can be
applied in stock market, computer exhibition, movie and broadcasting company
and education center etc.
SAFETY GUIDE
In order to make sure the device used properly and the safety of the operator,
please follow the directions when installing, using and maintaining:
1. The power supply of the device is DC 9V 1000mA.
2. Do not place it in too cold or too hot environment.
3. The device heats when working. So keep the environment airy to avoid
damage it by high temperature.
4. Do not try to take apart the device or repair it without permission of
professionals to avoid accident.
5. Do not split any chemical or liquid on the device or near.
6. This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the
appliance.
7.Changes or modifications not expressly approved by the party
responsible for compliance could viod the user’s authority to
operate the equipment .
TROUBLE SHOOTING
1） When no output signal, please check：
A：Whether the power cable is plugged into the device.
B：Whether the connection cable is damaged.
C：Whether there is input signal.
2）If the POWER LED does not light, maybe power supply is abnormal.
3）If the output picture is interfered, maybe the I/O device is not grounded.
4）If the output picture is blurred, please check whether the connection cable has
problem.
SPECIFICATION
Signal Type VGA
Connection Type VGA 15HDF
Minimum input level
positive
0.5Vp-p
Maximum input level
positive
1.0Vp-p
Video Input/Output Signal
I/O Impedance 75Ω
Maximum Resolution 1920*1440
Horizontal Frequency 30-100KHz
Vertical Frequency 40-120Hz
Video
Bandwidth 250MHz
Maximum Transmission 60 meters Resolution 800*600